Unisight Digital Technologies TZHEF08 Manual de usuario descargar pdf (Pagina 39)

Digital Video Network Surveillance System

Unisight Digital Technologies, Inc.

status, you can use numeric keys to input new device ID. The device ID value is

ranged among 01-255.

After you finish the modification, press “Confirm” button to save and take effect

or press “Cancel” to abort modification.

5.4 Video Output Standard and VGA Setup

Video output standard

There is one VOUT BNC connector at the rear panel of DVR. It is used to

connect with analog monitor and can support PAL or NTSC video output. You can

modify video output standard to match video input.

In “Display” menu: There is a list box named “Video Output Standard”, you can

use[Ç][È]key to select PAL or NTSC video output.

VGA setup

There is one VGA interface at the rear panel of DVR. You can use it to connect

with VGA display. You can define VGA resolution, refresh frequency in “Display”

menu.

There are following options: 1280*1024/60Hz,1024*768/60Hz, 800*600/60Hz.

You can use[Ç][È]key to select.

Press “Confirm” button to save or “Cancel” to abort.

5.5 Camera name and OSD Setup

Camera Name

In “Camera” menu, you can define name for each camera. Please notice that

camera’s name can not be copied. Shown as fig 5.9

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 86 87

Sin comentarios

Unisight Digital Technologies TZHEF08 Manual de usuario Pagina 39