Unisight Digital Technologies TZHEF08 Manual de usuario descargar pdf (Pagina 50)

Digital Video Network Surveillance System

Unisight Digital Technologies, Inc.

Fig 5.18 Motion alarm handle setup

Step 6: Motion alarm record channel setup: When there is motion alarm happened, you

can trigger related camera to start to record. In “Motion Alarm Handle” menu, you can select one

or more record channels. Please use[ENTER]or[EDIT]key to enable the flag into “9”.

Note: In order to make the cameras start recording, in “Recording” menu, you must enable

recording schedule and set “Rec Type” as “Motion Detection” or “Motion | Alarm”. Please refer to

chapter 5.12 for recording setup.

Step 7: Motion alarm schedule: When the motion alarm is happened in schedule, DVR will

response such as “On Screen Warning”, “Audible Warning”, “Upload to Center” and “Trigger

Alarm Output”. You can setup 4 time periods for one day and 7 days for one week.

Note: Time periods in one day can not be repeated.

Step 8: Motion alarm handle method setup: You can select one or more handle methods

such as “On Screen Warning”, “Audible Warning”, “Upload to Center” and “Trigger Alarm

Output”.

Description: If “On Screen Warning” is enabled, when there is motion alarm happened and

DVR is in preview mode, DVR will switch to the related camera. If you trigger more than one

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 86 87

Sin comentarios

Unisight Digital Technologies TZHEF08 Manual de usuario Pagina 50